Belkin N+ PM00781EA F5D8635-4 - Manual (Page 48)

46
N+ Wireless Modem Router
sections table of contents 1 2 3 4 5 7 8 9 10 6
UsINg THe Web-based adVaNCed UseR INTeRfaCe
setting WPa security
Note: To use WPA security, your wireless network cards must be
equipped with software that supports WPA . At the time this User Manual
was published, a security patch from Microsoft is available for free
download . This patch works only with Windows XP .
Your Router supports WPA-PSK (no server) . WPA-PSK uses what is
known as a pre-shared key as the security key . A pre-shared key is
basically a password that is between eight and 39 characters long . It
can be a combination of letters, numbers, or characters . Each client
uses the same key to access the network . Typically this is the mode that
will be used in a home environment .
setting WPa-PsK
IMPoRTaNT: Make sure your wireless computers are updated to work
with WPA2 and have the correct settings to get proper connection to
the Router .
1 . From the “Security Mode” drop-down menu, select “WPA-PSK
(no server)” .
2 . For “Encryption Technique”, select “TKIP” or “AES” . This setting will
have to be identical on the clients that you set up .
3 . Enter your pre-shared key . This can be from eight to 39 characters and
can be letters, numbers, or symbols . This same key must be used on
all of the clients that you set up .
4 . Click “Apply Changes” to finish . You must now set all clients to match
these settings .