Johnson Systems DE90-3000 Series Retrofit Control System - Manual (Page 36)

www.johnsonsystems.com 36
46. PRINTOUT Print various system configuration settings using a hand held infrared printer.
All DE90-3000 Series retrofit control systems come equipped with an infrared (I/R)
LED that provides the ability to printout all the system configuration settings, when
used in conjunction with a hand held infrared printer (Johnson System Inc., Part
Number: JS-IP). Point the hand held printer I/R LED directly at the DE90-3000 Front
Panel PRINTER I/R LED within 3 ft (1m).
Press EXECUTE to enter the menu.
Press MENU ( ) to scroll through and select which item(s) to printout.
SYSTEM? Prints general system information and configuration settings.
ANALOGS? Prints the channel patch for all 4 analog inputs.
Ø-PATCH? Prints the phase patch for all 96 dimmer outputs.
CURVES? Prints the dimmer curves for all 96 dimmer outputs.
F-ALARM? Prints the configuration settings for the fire alarm input.
S-ALARM? Prints the configuration settings for the security alarm input.
SCENE? Prints the level settings for each of the 24 dimmers within the 24 scenes.
SCENE>01 Press EXECUTE to toggle the pointer (>) and select which scene to print.
SCENE>FL Press MENU ( ) to select the desired scene (01 to 24) or all scenes (FL).
V-LIMIT? Prints the output voltage limit settings for each of the 96 dimmer outputs.
DCPATCH? Prints the configuration settings for the dimmer to channel patch.
FD-TIME? Prints the fade time settings for each of the 24 scenes.
2 ROOM? Prints the two room assignment for each of the 24 dimmer outputs.
DMXAPAT? Prints the DMX A patch for each of the 24 dimmer outputs.
DMXBPAT? Prints the DMX B patch for each of the 24 dimmer outputs.
ALL? Printout all items at once.
PRINTING Press EXECUTE on any item to begin printing.
Press ESCAPE or RESET to exit the menu.
47. DEFAULTS Set various system configuration settings to the factory default.
Press EXECUTE to enter the menu.
Press MENU ( ) to scroll through and select which item(s) to default.
ØPATCH1? Phase patch for JS-ICON™ product.
ØPATCH2? Phase patch for JS-ICON™ product.
ØPATCH3? Phase patch for JS-ICON™ product.
ØPATCH4? Phase patch for JS-ICON™ product.
ØPATCH5? Phase patch for JS-ICON™ product.
ØPATCH6? Phase patch for JS-ICON™ product.
ØPATCH7? Patches all PWM output channels to ØA.
ØPATCH8? Phase patch for three-phase DE90-3000 Series retrofit control systems.
Dimmer phase assignment is AABBCCAABBCCAABBCCAABBCC.
ØPATCH9? Phase patch for single-phase DE90-3000 Series retrofit control systems.
Dimmer phase assignment is AAAABBAABBBBAAAABBAABBBB.
CURVES? Sets all 24 dimmer curve profiles to Square Law curve.
ANA-OFF? Clears the control channel patch for all 4 analog inputs.
V-LIMIT? Sets the output voltage limit to full (127.5) on all 24 dimmer outputs.
DCPATCH? Clears the dimmer to channel patch and configures it for 1:1 operation.
FD-TIME? Sets the fade time at 5 seconds for all 24 scenes.
2 ROOM? Sets the two room assignment to room “A” on all 24 dimmer outputs.
SURE??? Press EXECUTE to select the item to default. Are you sure?
DONE!!! Press EXECUTE to set the selected default.
Press ESCAPE or RESET to exit the menu.