JUMO 707020 dTRANS T02 - Four-Wire Transmitter Data Sheet - Manual (Page 6)

2014-08-08/00379095
Data Sheet 707020 JUMO GmbH & Co. KG • 36035 Fulda, Germany Page 6/12
Analog outputs
Digital outputs (only for types 707021/... and 707022/...)
Current output
Output range proportional DC current 0 — 20mA or 4 — 20mA programmable
Accuracy ± 0.015mA
Linearity error ± 0.005mA
Max. burden 750

Burden error ± 0.01mA
Ripple ± 1% referred to 20mA, 0 — 90kHz; above 90kHz: tested to EN 50081
Output current on probe break,
over/underrange 0mA or 22mA (programmable)
Voltage output
Output range 0 — 10V or 2 — 10V
Accuracy ± 5mV
Linearity error ± 2mV
Load resistance
 2k
Burden error ± 15mV
Ripple ± 1% referred to 10V, 0 — 90kHz
Output voltage on probe break,
over/underrange 0V or 11V (programmable)
2 open-collector outputs
Output 1 lk7 or lk8 or fault output
Output 2 lk7 or lk8 or frequency output
Function lk7
Function lk8
Switching capacity of open-collector 35V, 100mA
Voltage drop in switched condition
 1.2V
Short-circuit strength not available
Frequency output
Function the frequency output produces the latest measurement as a frequency;
the frequency at range start/end is programmable
Smallest / highest frequency 10Hz / 1000Hz
Error output
Activation due to probe break, over/underrange and
internal errors (Pt100 of cold junction faulty, EEPROM does not respond)