JUMO 902930 Wtrans Transmitter RTD Temperature Probe with Wireless Data Transmission Operating Manual - Manual (Page 38)

7 Setup program
38
TTL/RS232
Figure 13: Establishing the connection between PC and probe
via the TTL/RS232 converter and adapter socket
For the setup via the TTL/RS232 converter, establish the following connections:
How to proceed:
1 Laptop/PC 3 Adapter socket, 4-pin
2 RS232 connector 4 Probe interface
Step Activity
1 Insert the RS232 plug (2) into the laptop/PC (1).
2 Open probe.
 Kapitel 3.1 "Fitting/exchanging the battery", Seite 19
3 Connect the adapter socket, 4-pin, (3) to the probe interface (4).