Kinze 3600 Lift and Rotate Planter Rev. 6/14 User Manual

T” hitch and wide row supplement, Model 3600 twin-line planter

background image

This manual applies to:

Model: 3600 Twin-Line Planters (2012 Production and on )

- 12 Row 30" and 16 Row 30" “T” Hitch, Mechanical/Conventional

- 12 Row Wide 36"/38" “Y” Hitch, Mechanical/Conventional

- 12 Row 30" “T” Hitch, EdgeVac/Conventional

The following parts pages are specific to your model 3600 planter. If any parts information is needed for Inner/outer
hitch, center frame, wing frame, center pivot, axle, row markers, center lift cylinder, wing lift cylinder, tongue cylinder,
row marker cylinder, or hydraulics, please refer to these supplement pages. For all other parts information, please
refer to the Parts manual (M0236-02).

Record the model number and serial number of your planter along with date purchased:

Serial Number ___________________________________

Date Purchased __________________________________

Information in this manual was current at time of printing. However, due to Kinze’s ongoing product improvement,
production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves
the right to change specifications or design without notice and without incurring obligation to install the same on
machines previously manufactured.

Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the
machine will travel when in use, unless otherwise stated.



, the Kinze


logo, Twin-Line


, Interplant


, and EdgeVac


are registered trademarks of Kinze Manufacturing, Inc.

MODEL 3600




Rev. 6/14