Klein Tools MM100 - Manual (Page 3)

Digital Multimeter Fuse Replacement
FUSE REPLACEMENT PROCEDURE (MM1000/MM1300/MM2000/MM2300/MM6000)
1. Ensure the meter is in the Off position.
a. Place the unit face down with the bottom of the unit facing away from you
b. Extend the meter kickstand
(1a) (1b)
2. To remove the rubber boot:
a. Place your thumbs on the back of the unit with your fingers firmly on the boot corners.
b. While pulling back on the corners, press your thumbs against the unit, and continue until the boot is
completely removed.
(2a) (2b)