BT 1300 Executive - Manual (Page 11)

10
On-Air 1300 Executive user guide ~ Edition 3 ~ 7th August ’01 ~ 3992
Press and hold the GREEN PHONE
button to switch the handset on.
Press and hold the RED PHONE button
to switch the handset off.
To switch the handset power on
and off
Making and ending calls
To make an external call
Press the GREEN PHONE button.
The display shows the
symbol.
Dial the number.
First enter the number to be dialled.
The number is shown in the display.
(If you make a mistake press C to
remove the incorrect digit).
If you have entered the number
correctly, press the GREEN PHONE
button to dial the number.
1 2 3
Your handset will automatically time the duration
of all external calls.
The handset display shows the call duration both
during your call and for a few seconds after it is
completed.
Call timer
Using the telephone
Press the RED PHONE button.
Press the GREEN PHONE button to
answer the call.
To end a call
To receive a call
You can adjust the volume during a
call and whilst using the phone on
handsfree.
Press the button to increase the
volume.
Press the button to decrease the
volume.
The display shows the current volume
level.
To adjust the earpiece volume
Note
The symbol on your handset display
indicates when you are in range of the base
station. If the symbol disappears you are out
of range and will need to move closer to the
base station.
Please note that this product does not have
autotalk standby. To end a call you must
press the
RED PHONE button, you cannot
just replace the handset on the base station.
Preparatory dialing