Remote access, Important – BT 1300 Executive User Manual
Page 30
29
On-Air 1300 Executive user guide ~ Edition 3 ~ 7th August ’01 ~ 3992
Remote access
You can operate your answering machine from
any external Touchtone
TM
phone by phoning your
BT On-Air and entering your remote access code.
Having a remote access code prevents other
people from accessing your answering machine
functions without your permission.
Important
You must change the Remote Access Code
from the default setting of 0000 for your
remote access to function.
Press OK to confirm.
Enter your new four digit code.
Press OK to confirm.
The display will ask you to Confirm code.
Re-Enter your new code.
Press OK to confirm.
Use the UP or DOWN button to scroll
to Base.
Press OK to confirm.
Use the UP or DOWN button to scroll
to Base settings.
Press OK to confirm.
Use the UP or DOWN button to scroll
to Answer.
Press OK to confirm.
Use the UP or DOWN button to scroll
to Remote acc.
Press OK to confirm.
Enter your old four digit code. (Factory
setting is 0000)
To change your Remote
Access Code
C
OK
C
OK
CODE
C
OK
CODE
If you forget to switch your answering
machine on you can do it from another
telephone:
Dial your telephone number and let the
phone ring. After approximately 10 rings
your On-Air will automatically answer,
although you will hear no message.
At this point press the
#
button,
followed by your Remote Access Code.
Wait for the confirmation tone then
press 7.
Your answering machine will now be
switched on.
To switch on your answering machine
from another external telephone
CODE
7
PQR
S
▲
▼
▲
▼
C
OK
C
OK
▲
▼
C
OK
▲
▼
C
OK
CODE