Braun NVL SERIES - Manual (Page 37)

Page 35
Open
(Down)
Close
(Up/Stop)
Manual Operating Instructions
Remove pump cover to access
hand pump and pump handle as
outlined on page 33. Refer to
release valve photos and illustra-
tion on page 34.
To Unfold Platform (Out):
Place slotted end of pump handle
onto backup pump release valve
and turn counterclockwise (open
1/2 turn only) until the platform
reaches ground level and roll stop
unfolds.
B
C
Using hand pump handle (Photo B):
1. Close hand pump valve (place
slotted end of pump handle onto
backup pump release valve and
turn clockwise).
2. Insert handle in pump and stroke
until platform folds fully (stops).
3. Open hand pump valve (turn
counterclockwise) until platform
UHDFKHVÁRRUOHYHOOpen 1/2
turn only.
4. Close hand pump valve (turn
clockwise).
Note: Valve must be tight, but do
not overtighten.
Stroking
Hand
Pump
Down (To Lower):