Decals and antiskid, Decals, For replacements – Braun NVL SERIES User Manual

Page 40: Warning, Manual operation

Advertising
background image

Page 38

29048

WARNING

LIFT OPERATING
INSTRUCTIONS

OPEN DOOR(S) AND SECURE

TO UNFOLD PLATFORM:

Stand clear and press
UNFOLD switch until
platform stops (reaches
floor level).

Note: In event platform

does not unfold, press
FOLD switch to release
Lift-Tite™ latches.

TO UNLOAD PASSENGER:

1. Load passenger onto
platform and lock wheelchair
brakes.
2. Press DOWN switch until
entire platform reaches
ground level and outer
barrier unfolds fully.
3. Unlock wheelchair brakes
and unload passenger from
platform.

TO LOAD PASSENGER:

1. Load passenger onto
platform and lock wheelchair
brakes.
2. Press UP switch to fold
outer barrier up and raise
platform to floor level.
3. Unlock wheelchair brakes
and unload passenger from
platform.

TO FOLD PLATFORM:

Press FOLD switch until
platform stops. Release
switch.

CLOSE DOOR(S)

DOT — Public Use Lift

30695

Whenever a wheelchair
passenger is on the platform,
the:
• Passenger must be
positioned fully inside
yellow boundaries
• Wheelchair brakes must
be locked
• Inner roll stop and outer
barrier must be up
Failure to follow these rules
may result in serious bodily
injury and/or property damage.

• Read manual before operating
lift.
• Load and unload on level
surface only.
• Engage vehicle parking brake
before operating lift.
• Provide adequate clearance
outside of vehicle to
accommodate lift.
• Do not operate lift if you
suspect lift damage, wear or
any abnormal condition.
• Keep operator and bystanders
clear of area in which lift
operates.

29052

29052

Replace missing, worn
or illegible decals.
Failure to do so may
result in serious bodily
injury and/or property
damage.

WARNING

Decals and Antiskid

Decals

The lift is only as safe as
the operator. Replace
any missing, worn or
illegible decals!
Part
numbers are provided for
decals. Inspect your lift for
missing, worn or illegible
decals. Call 1-800-THE
LIFT

®

for replacements.

31412

21494

30695

Note: Clean surfaces as
detailed on page 40 before
posting decals.

25675

WARNING

Lift installation and servicing prohibited by
anyone who has not been certified by The Braun
Corporation Sales and Service School. Certified
service technicians should call 1-800-THE LIFT
to receive applicable installation/service manual.
Failure to follow this policy may result in serious
bodily injury and/or property damage.

25675

21494

LIFT POWER

ON

OFF

OPERATING
INSTRUCTIONS

Read warnings and operate
lift as outlined on LIFT
OPERATING INSTRUCTIONS
decal. Lift operating
instructions apply to wheelchair
passengers and standees.

Standees: Standees must
stand at center of platform
(fully inside yellow boundaries),
grip handrails and lower head.

Interlocks: Interlocks vary in
type and operation. Interlocks
must be operational as defined
in NHTSA Operations Checklist.

DOT — Public Use Lift

31045

31045

O

P

E

N

C

L

O

S

E

OPEN

VALVE

CLOSE

UNLOCK

LOCK

TO REMOVE PUMP HANDLE:

1. Rotate top clip.

Using hand pump handle:

TO UNFOLD PLATFORM (OUT):

1. Close hand pump valve

(turn clockwise).
2. Insert handle in pump and
stroke until platform folds
fully (stops).
3. Open hand pump valve (turn
counterclockwise) until
platform reaches floor level.
Open 1/2 turn only.
4. Close hand pump valve
(turn clockwise).

DOWN (TO LOWER):

Open hand pump valve (turn

counterclockwise). Open
1/2 turn only.

UP (TO RAISE):

1. Close hand pump valve

(turn clockwise).
2. Insert handle in pump and
stroke until platform reaches
floor level.

TO FOLD PLATFORM (IN):

Insert handle in pump and stroke.

Note: Close valve before

operating electric pump.

TO STORE PUMP HANDLE:

1. Insert bottom of handle

behind bottom clip.
2. Rotate clip to lock.

DOT — Public Use Lift

31412

MANUAL OPERATION

Advertising