Brother HL 4040CN - Manual (Page 123)

Control panel setup
116
10
Printing the Printer Settings Page
10
Note
Node name: Node name appears in the Printer Settings Page. The default Node name of the network card
in the printer is “BRNxxxxxx” for a wired network and "BRWxxxxxx" for a wireless network (where
“xxxxxx” is the last six digits of the Ethernet address).
The Printer Settings Page prints a report listing all the current printer settings including the network print
server settings. You can print the Printer Settings Page using the printer control panel.
How to print the Printer Settings Page
10
a Make sure that the power cord is plugged in.
b
Turn on the printer and wait until the printer is in the Ready state.
c Press any of the Menu buttons (+, -, OK or Back) of the control panel on your printer to take the printer
off-line.
d
Press the + or - button to select Machine Info..
e Press OK, and then press OK again to print the Printer Settings Page.