Brother HL 4040CN - Manual (Page 164)

Troubleshooting
157
13
Wireless network troubleshooting
13
Wireless setup problems
13
The Brother print server is not found during setup using the automatic installer application on the
CD-ROM.
13
a Make sure that the printer is powered on, is on-line and ready to print.
b Move your computer closer to the Brother printer and try again.
c Reset the print server back to its default factory settings and try again. For the information how to reset
to the factory default settings, see Restoring the network settings to factory default on page 117.
Why do I have to change my printer’s network setting to “Wired LAN” during setup although I am
trying to setup Wireless LAN?
13
If you are using Windows
®
2000, Mac OS
®
X 10.2.4 or greater or your computer is connected to the wireless
network using a network cable, it is recommended you temporarily connect the printer to your access point,
hub or router using a network cable. You will also need to change your printer’s network setting to wired LAN
temporarily. Your printer’s network setting will be changed to wireless LAN automatically or during the course
of the setup.
For Windows ® :
13
Configuration in Infrastructure mode on page 42
Configuration with an access point that supports SecureEasySetup™ on page 37
Configuration in Ad-hoc mode on page 54
For Macintosh
®
:
13
Configuration in Infrastructure mode on page 72
Configuration with an access point that supports SecureEasySetup™ on page 67
Configuration in Ad-hoc mode on page 82