Landoll WL SERIES TOOTH CONTROL KITS User Manual
Page 20
Page 20
9J223
2
3
2
3
4
1
FRAME
TIGHTENING PROCEDURE FOR
JIC 37° SWIVEL FEMALE NUTS
1. Check flare and seat for defects.
2. Lubricate the connection.
3. Install hoses without twists.
4. Hand tighten until connection bottoms.
5. Using 2 wrenches to prevent twisting,
rotate the swivel nut 2 wrench flats
(1/3 turn).
6. For reassembly, follow the same
procedure but tighten only 1 wrench
flat (1/6 turn).
TIGHTENING PROCEDURE FOR
SWIVEL O-RING FITTINGS
1. Install the fitting until the metal washer
which backs up the o-ring contacts the
face of the boss.
2. Then orient the fitting by turning
counterclockwise up to 1 turn.
3. Tighten the lock nut using 50-60 foot
pounds torque.
4
2
MLHydSchematic
ML Pulvimulcher Conversion Kit for Independent Tooth Control
Item Part Number
Qty
Description
Weight
1
3J603
1
HYDRAULIC CYLINDER
50.06
2
4K602
4
ADAPTER,08MJ x 08MOR
0.15
3
4K912
2
COUPLING,MALE TIP x 08FOR
0.20
4
4K919
2
HOSE ASM,3/8 x 285”,3/4-16 SWIVEL FEMALE JIC 37°
5.42
MLHydSchematic
Page 18
10-31-07