Landoll M-1241 TRANSPORT PULVI-MULCHER - Manual (Page 20)

1092rev601 2K793 Page 17
8. Attach drawbar to frame using the 1” dia. x 7- 7/16” long mounting pin and secure with two 1/4”
dia. cotter pins. Fasten brace to machine by inserting bushing in the reinforced portion of the
brace and placing brace between attaching lugs at bottom of side channel. Use a 1/2” x 2 1/2”
cap screw through the frame and bushing. See figure 11.
9. Bolt flat spring to bottom of drawbar with 3/8” x 7/8” cap screws. Mount clevis with 1” x 6 -1/ 4”
pin and secure with two 1/4” dia. cotter pins. The flat spring supports the clevis for easier
hook-up. See figure 11.
1” x 6 -1/4” Pin
1/4” Cotter Pin
1” x 7- 7/16” Mounting Pin
Clevis
Flat Spring
Drawbar
Brace
(2) 1/4” Cotter Pins
Bushing
HHCS, 1/2” x 2-1/2”
3/8” x 7/8” cap screws,
3/8” Lock Washers
Figure 11
1092rev11-12-04