Speed up kit (optional) – Landoll 112 Alfalfa Seeder Medium Capacity Sure Stand User Manual
Page 27
ASSEMBLY INSTRUCTIONS
2-17
Speed Up Kit (Optional)
Seed rates can be doubled by using a 26-tooth sprocket.
Procedure is as follows: See Figure 2-18.
1.
Loosen and remove both drive chains.
2.
Remove 1/4” x 2 1/4” capscrew, lock washer, and nut
from #55 (large) sprocket hub on front transmission
shaft.
3.
Remove roll pin from #40 (small) sprocket hubs on
the front transmission shaft.
4.
Remove locking collar from left side of the front
transmission shaft.
5.
Remove bearing bolts from right side of the front
transmission shaft.
6.
Move shaft far enough to the right to remove small
sprocket.
7.
Install new sprocket.
8.
Replace all items (except #40 chain) in reverse order.
9.
Add extra links to #40 chain.
10. Adjust to proper tension.
Figure 2-18: Speed Up Kit Setup
DRIVE CHAIN SET FOR
26-TOOTH SEED RATE
DRIVE CHAIN SET
FOR 13-TOOTH
SEED RATE
(AS SHOWN ON CHART)
(DOUBLE THE RATE SHOWN ON CHART)