Landoll XXLO184 X-Fold Pulverizer - Manual (Page 18)

190rev501 9J698 Page 12A
PIN, 1” X 9 1/4”
TELESCOPING DRAWBAR
RETRACTED POSITION
EXTENDED POSITION
KLIK PIN
PIN, 1” X 9 1/4”
KLIK PIN
Hold the telescoping drawbar in the retracted position
by extending the 1” x 9 1/4” pin horizontally through the
end plates of the outer drawbar section and through the
tube on the inner section between them. Secure with
klik pin.
Hold the telescoping drawbar in the extended position by
extending the 1” x 9 1/4” pin vertically through the plates on
the top and bottom surfaces of the outer drawbar section
and through the end plates of the inner drawbar section.
Secure with klik pin.