Landoll 2111 Coulter Chisel - Manual (Page 59)

ASSEMBLY INSTRUCTIONS
3-27
Figure 3-20: Rear Tow Hitch Installation (Option)
Rear Tow Hitch Installation
(Option)
1. Attach rear tow hitch to the rear tow hitch arms using
3/4-10 x 2-1/2 hex head cap screws and hex lock
nuts.
2. Attach the rear tow hitch assembly to the rear bars of
the center frame using rear tow hitch clamp plates,
5/8-11 x 9-1/2 hex head cap screws, and hex lock
nuts (See Figure 3-20.). The rear tow hitch assembly
should be centered on the back bars of the center
frame (See Figures 3-17, 3-18, and 3-19.)
3. Slide rear tow hitch bar into mouth of rear tow hitch
and attach with 3/4-10 x 2 hex head cap screw and
hex lock nut through hole closest to the rest of the
machine. Use hitch pin, compression spring, 1/4 x 1
slotted roll pin, and 1/4 x 3 slotted roll pin in hole
closest to the front of the machine.
m148332 op
5/8-11 X 9-1/2 HEX HEAD
CAP SCREW GR5
REAR
HITCH ARM
REAR TOW
HITCH
3/4-10 HEX
LOCK NUT GRB
3/4-10 X 2-1/2 HEX
HEAD CAP SCREW
TOW
ASSEMBLY
REAR
HITCH ARM W/
HOSE LOOPS
REAR HITCH
CLAMP PLATE
TOW
5/8-11 HEX LOCK
NUT GRB