Landoll 2000 Series Row Crop Cultivator - Manual (Page 22)

3-12 F-140-0512 Edition
ASSEMBLY INSTRUCTIONS
Figure 3-10: Nurse Tank Hitch Installation
Nurse Tank Hitch Assembly
IMPORTANT
See Figure 3-10 for parts names.
1. Set tool frame bar on support stands.
2. Attach the hitch frame weldment to the tool frame bar
by straddling it around the center tool frame mount
assembly. Use the tool mount 5/8-11 u-bolts, flat
washers, and hex lock nuts to secure this assembly.
3. Assemble the hitch assembly to the hitch frame
weldment (See Figure 3-10.)
a. Align the hitch assembly centered on the hitch
frame weldment.
b. Use the 3/4-10 u-bolts and hex lock nuts to
secure these weldments.
5/8-11 TOOL MOUNT
U-BOLT
TOOL FRAME
BAR
TOOL FRAME
MOUNT
3/4-10 U-BOLT
5/8 FLAT WASHER
5/8-11 HEX LOCK NUT
HITCH FRAME
WELDMENT
3/4-10 HEX
LOCK NUT
HITCH ASSEMBLY
HITCH WELDMENT
545m104766 op