Leica Biosystems IPC - Manual (Page 32)

30 Instructions for Use V 1.9 RevD – 05/2013
4. Instrument Setup
4.7 Filling and inserting the magazines
50
53
54
Depending on the type of cassette used, addi-
tional inserts must be placed into the magazine
(54) to guide the cassettes properly:
This includes: 53 – Metal insert
50 – Adhesive strip (2 mm thick)
Fig. 27
Metal strip
Insert the metal strip (53) so that the angled part
(58) touches the back panel (56) of the magazine
(54, Fig. 29 ).
51
58
Inserting the strips
56
Adhesive strip 2 mm (50)
• Remove protective foil and attach adhesive
strip in magazine so that it is centered in the
front part of the magazine and fits flush against
the bottom of the magazine foot (55, Fig. 28 ).
55
50
Fig. 28
Fig. 30
51
52
Then push the metal insert downwards until the
two plugs (51) snap into the two grooves (52) in
the magazine foot ( Fig. 30 ).
58
56
53
55
Fig. 29