Leica Biosystems IPC - Manual (Page 43)

41 Leica IP C
5.1 Control panel functions The control panel
• consists of a membrane keyboard with six
pressure-sensitive keys (four of them with an
LED, two LED displays and a two-figure seven-
segment display.
• controls the printer functions and the print jobs
that are defined via the control software.
• indicates current printer status and processes
in progress.
• indicates errors and / or error messages.
• controls the (optional) automated unload sta-
tion.
INK EMPTY LED
LED off:
Sufficient quantity of ink remaining—printing is
possible without any restrictions.
LED flashing:
Ink cartridge will be empty shortly—keep
replacement ink cartridge handy.
LED illuminates:
Ink cartridge empty, no further printing possible.
Fig. 47
MAG. EMPTY LED
LED off:
Magazines are full or up to that point no further
cassette has been requested from a magazine
that has just been emptied.
LED flashing:
Flashing LED and number on display indicate
which magazine is empty.
If several magazines are emptied at the same
time, the corresponding magazine numbers are
indicated in a recurring sequence.
After refilling the magazine,
LOADED must be pressed to inform
the printer that the magazine has
been refilled.
The printer will resume the interrupted print job
where previously left off.
5. Operation
р