Durchlichtuntersatz und kaltlichtquelle – Leica Biosystems S series User Manual
Page 19
Advertising
Leica S Series
User Manual
19
1. Remove the glass stage plate.
2. Pull the locking mechanism forward.
3. Set the incident-light stand to the sub-base
for transmitted light and engage it with the
connection screw.
4. Press the locking mechanism backward.
The incident light base and the sub-base
for transmitted light are now connected.
5. Insert the glass stage plate.
6. Insert the universal light guide in the
opening at the rear.
Additional information can be found in
the User Manual for cold-light source
Leica KL300 LED.
Sub-base for transmitted light and cold light source
Advertising