Lenze EZS3-xxxA200 Sinusoidal filter 115-150A - Manual (Page 13)

l
13 EDKZS3Y200 DE/EN/FR/ES/IT 1.1
The following must be observed when using sinusoidal filters:
ƒ Use sinusoidal filters only together with standard asynchronous machines 0 ... 550 V.
ƒ Operation is only permissible using a V/f or V/f 2 characteristic control.
ƒ Operation is only permissible using a switching frequency of 2 ... 4 kHz.
– Ensure that the automatic switching frequency reduction is deactivated (see
documentation of the standard device).
ƒ Limit the output frequency to maximally 150 Hz.
ƒ Please note when dimensioning the controller that the controller has an additional load
of 10 ... 15 %.