Lenze E94AZHN0026 - Manual (Page 38)

3 Mechanical installation
EDK94AZHN26 DE/EN/FR/ES/IT 1.1
38
l
H1_MechINS−MechInstall_Schr
3 Mechanical installation
Installation steps
DIN rail mounting
1. Position the motor brake control module with the DIN rail adapter
2 at the bottom
of the DIN rail.
2. Let the motor brake control module snap into the upper DIN rail edge against the
resistance of the spring force.
3. Check that the motor brake control module is securely connected.