Lenze E94AYAD - SM300 - Manual (Page 32)

4 Electrical installation
Addressing
EDK94AYAD DE/EN/FR/ES/IT 2.0
32

H1_E_INST-Typ4 Kabelquer
4 Electrical installation

Note!
For installation, the documentation of the controller must be observed.
Addressing
AnunambiguousPROFIsafetargetaddressensuresthatadatatelegramreachesthecorrect
node.
DIP switch  Labelling
1 2 3 4 5 6 7 8 9 0
Value of the address bit 1 2 4 8 16 32 64 128 256 512

Note!
The combination of a safety module SM300 of version VA 1.08 or higher and a
PROFIBUS communication module of version VB 0.93 or higher enables
avoiding the error that occurs when an address is set to 0. For this purpose, a
defined PROFIsafe target address must be stored in C13897 or 14897 of the
PROFIBUS communication module.