Lenze E94AYAD - SM300 - Manual (Page 35)

Electrical installation
Connection data
4
EDK94AYAD DE/EN/FR/ES/IT 2.0
35

H1_E_INST-Typ4 Kabelquer
X82.3 Labelling Description
GCL GND clock output
GI2 GND IN I2A/I2B
I2B Sensor input 2, channel B (only for passive sensors)
I2A Sensor input 2, channel A (only for passive sensors)
GCL GND clock output
GI1 GND I1A/I1B
I1B Sensor input 1, channel B (only for passive sensors)
I1A Sensor input 1, channel A (only for passive sensors)
n. c. This terminal is not assigned.
X82.4 Labelling Description
GCL GND clock output
GI4 GND I4A/I4B
I4B Sensor input 4, channel B (only for active sensors)
I4A Sensor input 4, channel A (only for active sensors)
n. c.
This part of the terminal strip is not assigned.
Sensor input 3 is not available.
n. c.
n. c.
n. c.
n. c.
Terminal data Conductor cross-section Tightening torque
[mm 2 ] [AWG] [Nm] [lb-in]
Rigid 0.14 ... 1.5 26 ... 16
Spring terminal With wire end
ferrule
0.25 ... 0.5 24 ... 20