6 electrical installation, Wiring to a host, Electrical installation – Lenze E82ZBL-C User Manual
Page 59
Advertising

Electrical installation
Wiring to a host
6
EDKMF2102 DE/EN/FR 7.1
59
l
H1_E_INST−kabelspez_LI
6
Electrical installation
Wiring to a host
{
Danger!
You have to provide additional electrical isolation if ...
ƒ
an 820X and 821X controller is connected to the host and
ƒ
a safe electrical isolation (reinforced insulation) according to EN 61800−5−1
is required.
General wiring information:
1. Adhere to bus topology, therefore do not use stubs.
2. Use LECOM cable in accordance with cable specification.
Advertising
This manual is related to the following products: