Lenze E82ZAFFC001 - Manual (Page 30)

4 Electrical installation
EDK82ZAFFC−001 DE/EN/FR 6.0
30
l
E_inst_mot
)
Note!
If you use a flat cable for the bus connection to 8200 motec, we recommend
the following adapter (see picture below):
Order designation E82ZMFF
0
1
E82ZAFF004
1. Screw component 0 into the fitting thread of the motec carrier housing.
2. Insert AS−i flat cable into component 1 and plug component 1 onto component 0
3. Tighten the adapter screws
4. Assign the terminals.