Lenze E82ZAFFC001 - Manual (Page 34)

5 Commissioning
Status display
EDK82ZAFFC−001 DE/EN/FR 6.0
34
l
H2_statusanzeige−statusanzeige
Status display
LED status
Description Green LED Red LED
OFF OFF No supply voltage
ON OFF Bus supply and communication are ok.
ON ON l Communication is interrupted.
l Parameter writing not possible.
l "IC watchdog" has been reset.
BLINKING ON Communication not possible because no valid bus node address has
been assigned (address = 0).
)
Note!
ƒ Please note the position markings on the fold−out page.
ƒ The function module is supplied via the AS−i bus.