Lenze E82ZM113-001 - Manual (Page 35)

Mechanical installation
Mounting steps
3
EDK82ZM113−001 DE/EN/FR 1.1
35
l
H1_MechINS−Montage_Var_E82ZM−001
How to mount the filter:
1. Put the frequency inverter
0 on the housing of the motor interference suppression
module 1.
2. Move the frequency inverter to the fixing rail of the motor interference suppression
module.
3. Move the fixing rail 2 to the heatsink slot of the standard device and screw the
frequency inverter and the motor interference suppression module together.
4. Connect the connecting cable of the motor interference suppression module 3 to the
terminals of the standard device (U, V, W, and PE). ( ^ 38). Observe the
documentation of the standard device!
5. Mount the unit to the control cabinet.