Lenze E82ZAFBC001 - Manual (Page 37)

Electrical installation
Wiring
5
EDK82ZAFBC−001 DE/EN/FR 7.2
37
l
H1_E_INST−INS_Klemmenbeleg
Wiring
0
1
E82ZAFB014
1. Wire the fieldbus function module 0.
– Remove approx. 10 cm of the cable sheath.
– Connect the shield to the shield sheet using the cable tie.
– Wire the fieldbus function module (see corresponding Mounting Instructions).
Terminal 28 (controller inhibit) of the fieldbus function module
0 is inactive. Controller
is inhibited via terminal 28 of the bus−I/O function module.
2. Wire the bus−I/O function module 1 (terminal assignment ^ 40 ).
3. Connect mains and motor (see Mounting Instructions for the 8200 motec).