Lenze EPZ-10202 - Manual (Page 10)

Preface and general information
These Instructions
EDK10202EZ3 DE/EN/FR 5.1 10
l
DUMMY_NUM_Reset−Ext−board_2_en
0Fig. 0Tab. 0
1 Preface and general information
These Instructions
ƒ contain the most important technical data, describe the installation, handling and
commissioning of the extension board II.
ƒ are only valid
– for the extension board II with the type designation EPZ−10202
– together with the Mounting Instructions for the Drive PLC
Description
The extension board II extends the Drive PLC by 14 digital intputs and 8 digital outputs.
Scope of application
Applicable together with the Drive PLC type EPL−10200−EI
Accessories
Items supplied
– two plug connectors, 2 x 13 pole each (already assembled at EPL−10202−EI)
– two terminal strips, six−pole each for digital inputs (I9 ... I14 und I15 ... I20)
– one 6−pole terminal strip for digital inputs (05 ... 010)
– one 6−pol terminal strip for output voltage (+024,
^24),
digital inputs (I21, I22), digital outputs (011, 012)