Lenze ERBMxxxRxxxW - Manual (Page 30)

2 Safety instructions
Residual hazards
EDKRBM390R DE/EN/FR/ES/IT 3.0
30
l
H1sic_EN−UR_Warn
Residual hazards
{
Danger!
Dangerous electrical voltage
The terminals of the brake resistor may carry
dangerous voltages during operation of the basic
device and up to three minutes after mains
disconnection.
Possible consequences:
ƒ Death or severe injuries when touching the
terminals.
Protective measures:
ƒ Before working on the brake resistor disconnect
the basic device from the mains.
ƒ Check all power terminals for safe isolation from
supply.
ƒ Select the mounting location so that the
operating conditions mentioned in the technical
data are always ensured.
}
Danger!
Hot surface
The brake resistor may get very hot. (Temperatures
are listed in the chapter "Technical data".)
Possible consequences:
ƒ Severe burns when touching the brake resistor.
ƒ Fire or smouldering fire if flammable materials or
substances are placed near the brake resistor or
may get to it.
Protective measures:
ƒ Before working on the brake resistor check its
surface temperature.
ƒ Select the mounting location so that the
operating conditions mentioned in the technical
data are always ensured.
ƒ Protect the mounting location by suitable fire
prevention and protection against contact.
ƒ Apply clearly visible label with a "Caution, hot
surface" safety note on the protection against
contact.