Lenze g500-S Shaft-mounted helical gearbox - Manual (Page 14)

Mechanical installation
Important notes
4
EN
14 Lenze ¯ MA 12.0013 ¯ 1.0
4 Mechanical installation 4.1 Important notes
¯ Use load carrying equipment for transport!
¯ Before the transport
– check that all components are safely mounted,
– fasten all transport aids (eye bolts or support plates).
}
Danger!
Danger due to toppling or falling loads!
¯ The payload of the hoists and load handling devices must at least
correspond to the weight of the load.
¯ The load must be secured in such a way that it cannot topple or fall
down.
¯ Do not stay under a pending load!
4.2 Transport equipment for gearbox
}
Danger!
The motors attached to the gearbox are partially equipped with eyebolts.
These are exclusively determined for mounting/dismounting the motor
to the gearbox and must not be used for the complete geared motor!
g500−S130 ... S660
Fig. 1 Ear of the complete drive system
(
Stop!
Observe load carrying capacity!
Staying under floating load is prohibited!