Lenze g500-S Shaft-mounted helical gearbox - Manual (Page 16)

Mechanical installation
Preparation
Condensation drain hole of the motor
4
EN
16 Lenze ¯ MA 12.0013 ¯ 1.0
4.3.3 Condensation drain hole of the motor
)
Note!
Lenze delivers motors with condensation drain holes with sealed
condensation drain holes. The holes are sealed with a plastic plug or a
locking screw. This does not affect the type of protection and the motor is
protected against the ingress of foreign substances during transport and
operation. Further information, (
¶ 36).