Setting all can nodes to the "operational" status – Lenze ECSCMxxx User Manual
Page 262
Advertising
Diagnostics
Diagnostics with PCAN−View
Setting all CAN nodes to the "Operational" status
l
262
EDBCSXM064 EN 11.0
10.4.2
Setting all CAN nodes to the "Operational" status
How to set all CAN nodes to the "Operational" status:
1. Create the following CAN message under "New transmit message":
2. Select the CAN message in the "Transmit" window and press the <space bar> once
to transmit the CAN message.
Advertising