Lenze EZN3x0015H230 - Manual (Page 35)

Mechanical installation
Important notes
3
l
35 EDKZNXXXX−001 DE/EN/FR 3.0
3 Mechanical installation
3.1 Important notes
ƒ The mounting location must always comply with the operating conditions specified
in the technical data (
¶ 32). Take additional measures if necessary.
ƒ The mounting plate of the control cabinet must have the following properties:
– electrically conductive
– free of lacquer
ƒ A free air circulation must be ensured for dissipating the heat.
(
Stop!
Heavy device weight
The device is very heavy and must be lifted for the mounting.
Possible consequences:
ƒ Injury to persons, particularly backache when lifting and holding the device,
respectively
ƒ Injury to persons and damage to material assets due to the device falling
down
Protective measures:
ƒ The device must only be carried with a load bearing system such as an
indoor crane permitted for the device weight
ƒ Before the transport, the hoist, the load bearing system and lifting
accessories must be checked for sufficient payload and faultless status
ƒ Do not remove the hoist and the lifting accessories until the device lies safe
on a stable surface or is finally mounted.