Lenze IPC Industrial PC System - Manual (Page 11)

Product description
"Industrial PC" system
3
l
11 EDSIPCx7 EN 4.1
3.2 "Industrial PC" system
The "Industrial PC" system by Lenze offers a broad platform for the creation of devices
configured in a customised manner providing corresponding hardware components for
the respective application case. For the corresponding hardware components like CPU,
ROM, RAM, etc. please refer to the current IPC catalogue.
According to the requirements of the customer application, the operator devices can be
selected from a variety of possibilities (screen size/operator panels). The consistently
implemented platform strategy with defined interfaces with regard to electronics and
mechanics allows for various combinations of the modules. Like this, the suitable system
can be implemented for virtually every application.
Apart from the standard devices there is a number of accessory components which provide
for the integration of the individually adapted Industrial PC into a variety of different
system environments.
For the Industrial PCs as component also the following complete automation systems are
offered:
ƒ Control technology
Logic & Motion with CANopen and EtherCAT (
^ "Control technology" system manual)
ƒ Visualisation technology
Scalable visualisation system with CANopen, PROFIBUS, PROFINET, and Ethernet (
^
"Visualisation technology" system manual)
The IPC platform is complemented by cost−optimised HMIs which are offered in fixed
configurations and which, to a limited extent, also perform automation functions. This
EL100 series is designed for the installation in control cabinet doors and is solely different
with regard to the design of the touch−sensitive touchscreen (see operating instructions
for the HMI EL100/EL100−ECO).