Lenze IPC Industrial PC System - Manual (Page 5)

About this documentation
Conventions used
1
l
5 EDSIPCx7 EN 4.1
1.2 Conventions used
This documentation uses the following conventions to distinguish between different
types of information:
Spelling of numbers
Decimal separator Point In general, the decimal point is used.
For instance: 1234.56
Text
Program name » « PC software
For example: »Engineer«, »Global Drive
Control« (GDC)
Icons
Page reference ^ Reference to another page with additional
information
For instance:
^ 16 = see page 16
Documentation reference , Reference to another documentation with
additional information
For example:
, EDKxxx = see
documentation EDKxxx
1.3 Terminology used
Term Meaning
IPC Industrial PC
CPC Cabinet PC; control cabinet PC with decentralised
display/operating unit (MP, Thin Client)
CS Command Station; stand−alone operator station
EL Embedded Line PC; for installation in control cabinets, machine
panelling, or other mounting cutouts
MP Monitor panel; external display
Thin Client Device for representing and operating applications which are
located on a remote host computer (e.g. CPC).
PLC Programmable Logic Controller