Lenze Engineer v2.21 - Manual (Page 152)

Defining the system functionality
Function block editor (FB Editor)
152
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
[8-8] Example for adding an additional connection in the FB Editor (representation: Connection as line)
• The procedure of extending the connection is independent of the representation format in
the FB Editor (valid for line/flag).
Scenario: The existing connections (line)
are to be extended.
• Mouse-click + <Ctrl> on the desired end
point of the connection.
• Move the copied end point of the
connection line to the desired FB input.
• In the example of bTi8 to
bTi2 ).
• Click the desired FB input to add the new
connection.
• In the example of bTi2
• An additional connection has been added
to the bTi2 by the bOut FB output.