Lenze Engineer v2.21 - Manual (Page 69)

Lenze · Engineer · 2.13 EN - 10/2014
69
Mapping the system structure in the »Engineer« project
Inserting a device detected online
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Note: The CAN bus connection only lists devices that are not yet included in the Project tree.
• Unidentified devices do not have suitable device descriptions. Unidentified devices cannot
be inserted into the project.
5. Select the desired field devices and click OK.
• Click Start to transfer the device parameters to the »Engineer« project.
• Click Close to insert the field device (without parameter download) into the »Engineer«
project.
• The field device has been inserted online into the Project tree: