Lenze Engineer v2.21 - Manual (Page 172)

Defining the system functionality
User menu
172
Lenze · Engineer · 2.13 EN - 10/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Tip!
For a cross-project reuse of a configured User menu, the Configure user menu dialog box
provides the Export and Import buttons.
8.12.2 Transferring the parameter selection to other controllers (in-project)
The Store selection and Restore selection buttons on the User menu tab serve to transfer the
existing parameter selection to the User menu of another controller within the project.

How to transfer the parameter selection for other controllers in the project:
1. Go to the User menu tab of the controller the User menu of which is to be transferred and
click the Store selection.
2. Change to the User menu of the controller that is to accept the memorised parameter
selection in its User menu and click the Restore selection button.
• The User menus of both controllers then have the same parameter selection.