Lenze Engineer v2.21 - Manual (Page 251)

Lenze · Engineer · 2.13 EN - 10/2014
251
Error messages
Communication entity generator
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PlugIn method not executable {0} [CEPLC0003]
PlugIn method, error in execution {0} [CEPLC0004]
Response (Lenze setting printed in bold)
 Error  Warning  Information
Cause Remedy
A plug-in (PlugIn_Drive PLC Developer Studio) is needed
for the generation of program code. The necessary
method cannot be executed at the present time.
Close all DDS or PLC Designer processes on the PC.
Response (Lenze setting printed in bold)
 Error  Warning  Information
Cause Remedy
A plug-in (PlugIn_DrivePlcDeveloperStudio) is needed for
the generation of program code. An error has occurred
during execution of the indicated method.