Marshalltown SP684 SURFACE SHARK Surface Planer - Manual (Page 42)

PAGE 42 SP684 SuRFACE ShARK SuRFACE PLANER
STORAGE
Application: SP684 SURFACE SHARK
Proper procedure for long term storage of the Surface
Planer will protect it against the effects of corrosion
and damage. If the Surface Planer is not to be
operated for a period of 30 days or more, proceed to
store as follows:
1) Clean all accumulated foreign material from the
Surface Planer utilizing an appropriate solvent.
Observe all applicable safety precautions for the
solvent.
2) Follow the procedure as outlined in the material
supplied by the engine manufacturer describing long
term storage for the engine.
3) Check all visible parts for wear, breakage or damage.
order any part required to make the necessary repair.
This will avoid a needless delay when operating the
Surface Planer at next use.
4) Apply a dry film lubricant to all exposed metal
components to prevent the formation of rust.
5) Store the Surface Planer inside. If the Surface
Planer must be stored outside, protect it with a suitable
covering.
SPECIFICATIONS
FRAME
STRuCTuRE unitized, welded steel plate
DRIvE REDuCTIoN SySTEM vX335 belt/Pulley
DRIvEShAFT SIZE AND CoNFIGuRATIoN 13/16
inch (21 mm) hexagon
MAXIMuM CuTTING DEPTh 5/8 inch (16 mm)
MAXIMuM CuTTING WIDTh 8 inches (203 mm)
MAXIMuM MAChINE LENGTh 43-1/4 inches
(1099 mm)
MAXIMuM oPERAToR hANDLE hEIGhT 38-3/8
inches (975 mm)
ovERALL MAChINE WIDTh 16-1/8 inches
(410 mm)
CuTTING PRoXIMITy To 3-1/4 inches
(83 mm) without edger attachment
LATERAL boRDER
vACuuM CLEANER CoNNECTIoN 1-1/2 or 3 inch
(38 or 76 mm) outside diameter.
GENERAL
bASIC WEIGhT 160 lbs (73 kg),
less drum and flails.
MAXIMuM GovERNED ENGINE 3450 RPM
SPEED FoR 5 hP CATEGoRy,
4 CyCLE, GASoLINE ENGINES