MK Diamond MK-1280 Rolling Cart - Manual (Page 3)

MK-1280 CART ASSEMBLY
Fig. A
Place one nut on each hook bolt.
Thread nut 2/3 up the hook bolt
Fig. C
Place washer on knob and thread
knob on to hook bolt
Fig. B
Place hook bolt through rear hole
of tow bracket
Fig. D
Place Nylok nut on bottom of hook
bolt and tighten. Repeat procedure
for rear lock
Fig. E
Place saw on cart. Place hook bolt
over saw handle. Tighten knob
LOCK ASSEMBLY
Fig. A
To set brake press “on” the
lever on back casters
SETTING BRAKE
NOTE: The wheels and casters each have a zerk fitting that
needs to be lubricated every 6 months or as needed.
3