MK Diamond EC7600 - Manual

No perform ance guaran tee without u sing genuine Shin daiwa blade s. No-load revo lution speed : 4180 min-1 (rpm) Use reinforc ed abrasive b lades with m aximum useable perim eter velocity of 248 ft/se c.
USE ONLY G
ENUINE SHINDAIWA
BLADES
EC7500 Maximum b lade diamete r: 12 in. Maximum b lade thickne ss: 0.16 in. Arbor diam eter: 1 inch
SHINDAIWA OWNER’S AND
OPERATOR’S MANUAL
EC7500/EC7600
ENGINE CUTOFF
SAW
WARNING!
■ Read this manual and familiarize yourself with its contents.
■ This unit is designed primarily for cutting construction materials and metal
according to the type of cutting wheel installed.
■ To minimize the risk of injury to yourself and others, always wear hearing
protection, a dustproof mask, goggles and a helmet when operating this unit.
■ Keep this manual handy so you can refer to it when required.
Part Number 68002-94310 Rev. 12/02
(EPA VERSION)