Mk-2000 gas saw inspection – MK Diamond MK-2000 Gas User Manual
Page 41
Advertising
41
MK-2000 GAS SAW
INSPECTION
(J)
Verify the Engine Adjustment
Strap Lock-Nut is loose then
tighten the Adjustment Strap.
(K)
Check Micro-V Belt tension
(proper tension 1/8-inch).
(L)
Continue adjusting Micro-V Belt
until tension is correct. then
tighten the Engine Adjustment
Strap Lock-Nut.
(M)
Check Micro-V Belt tension
(proper tension 1/8-inch).
(N)
tighten Base Plate.
(O)
Install the Belt Guard.
BLADE WILL NOT CUT PROPERLY
(A)
Check for Smoothness or “Glazing”.
(B)
Check for Proper Rotation.
(C)
Ensure Blade Core bent.
Advertising