MK Diamond MK-4000 Series - Manual (Page 20)

20
MK-4000 SERIES OPERATION
2. Remove arbor bolt. If blade is mounted on right side saw, the bolt has left hand threads. To
remove turn clockwise. If the blade is mounted on left side of saw, bolt has right hand threads.
To remove, turn counter-clockwise.
3. Pull off outer flange.
1. Remove Blade Guard.
Unscrew Hose Fitting
NOTICE
Before mounting the blade, machine should be turned “OFF”. Clean the blade collars and stub shaft.
Remove Arbor Bolt Pull Off Outer Flange
Install New Blade Slide Outer Flange and Arbor bolt in place
BLADE MOUNTING INSTRUCTIONS
A. Unscrew the hose fitting to disconnect hose.
B. Hold the Blade Guard by the handle. Release the inner latch.
C. Pull the guard up and off the Saw.
4. install new blade.
5. Slide in the outer flange in place.
Release Inner Latch