MTS DCPD Measurement System - Manual (Page 20)

Specifications
Specification Parameter
100-240VAC, 50-60Hz, 5-2Amp Input voltage
5ºC to 40ºC (41ºF to 104ºF) Temperature
5% to 85%, non-condensing Humidity
2000 m (6562 ft) maximum Altitude
For proper ventilation, allow 51 mm (2 in) clearance on all sides of the
chassis. The rear of the chassis requires a minimum clearance of 15.24 cm
(6 in) for cable connections. Space Requirements
Note: To maintain EMC compliance, the controller must be installed
in a location that does not exceed the EN 55011 emission standard.
Height: 149.2 mm (5.875 in.) Dimensions (with handles
and feet)
Width: 482.6 mm (19 in.)
Depth: 336.55 mm (13.25 in.)
6.24 kg (13.75 lb) Weight
20 | DCPD Measurement System
Introduction