MTS Model 680-01 High-Temperature Grips - Manual (Page 16)

Model 680.01 High-Temperature Grips 16
mount a grip to the actuator rod. Attachment kits are not supplied with a grip set,
and they must be ordered separately. The MTS base part number is 052-101-0xx.
Each kit contains a mounting stud, a set of spiral washers, and sometimes a shim
kit. Each kit is designed to mount the grip to a specific actuator or force
transducer.
Grip Attachment Components
Cooling kits
Accessory kits for connecting a cooling water source and drain to the grips are
available in several configurations. A cooling kit is required for grip operation at
elevated temperatures. Each kit includes two water service manifolds (one to be
mounted to each load unit column), flow metering valve, polyethylene tubing,
and all required fittings.
Load cell
Load cell to grip
attachment kit
Upper Grip
Lower Grip
Actuator to grip
attachment kit
Actuator rod
1 Stud and
1 pair of
spiral
washers
Water Cooling Kits
K IT P ART N UMBER L OAD U NIT C OLUMN
048-974-801 2.5–4.0 in diameter
048-974-802 2.5–4.0 in diameter
048-974-803 2.5–4.0 in diameter
048-974-804 6.0 in diameter
048-974-805 all