MTS Insight Material Testing Systems - Manual (Page 54)

MTS Insight™ Material Testing System 54
Main Power Switch (I/O) and E-Stop
Operation
Main Power Switch (I/O) and E-Stop
The main power switch for the machine is on the base of the frame.
The frame is also equipped with an Emergency Stop button. The Emergency
Stop will cut the power to the motor and should be used for emergency purposes
only.
To shut down the motor power and stop the test program, press the Emergency
Stop button. Twist the switch clockwise to release it. Use the Emergency Stop
button to shut down your test if something unexpected should happen.
Low-Capacity Mid-Capacity High-Capacity
Main power and
E-Stop Switches